Key takeaways
- Compare the best hot tub steps and cover lifters, from snap-together spa steps with storage to gas-assisted cover caddies, with sizes and fit tips.
A hot tub is only relaxing when getting in and out feels easy and the cover does not turn into a wrestling match. Two accessories solve most of that daily friction: a sturdy set of spa steps that matches your tub wall height, and a cover lifter that lets one person fold, move and store a heavy insulated cover without dragging it across the deck. This guide compares three proven steps and two proven lifters, covering snap-together resin steps, a wide storage step, a gas-assisted cover caddy and a simple low-mount pivot lift, so you can match the hardware to your tub shape, your deck space and your strength.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most backyard spas, pair the Confer Plastics Handi-Step HS2, a 28.5 inch wide resin two-step rated for straight or curved tubs, with the Cover Valet Cover Caddy, a gas-assisted undermount lifter that fits square, round and octagonal covers. Owners short on rear clearance should choose the Blue Wave low-mount pivot lift instead, and anyone wanting hidden storage should pick the wide XtremepowerUS storage step.
Confer Plastics Handi-Step HS2
The Handi-Step HS2 is the classic spa step for a reason. It snaps together with no hardware, and its interchangeable treads can be flipped so the step sits flush against a straight-sided cabinet or follows the curve of a rounded spa. That one detail matters more than it sounds, because a gap between the top tread and the tub wall is exactly where a wet foot can hesitate. The grooved tread surface sheds water and gives bare feet something to grip, and the molded resin body shrugs off sun, rain and splashed spa chemicals without rotting or rusting. At 28.5 inches wide, the treads leave room to plant both feet and turn around before stepping down, which is how most people actually exit a tub. It is made in the USA and sized for standard-height spas, so it suits the majority of portable hot tubs on patios and decks.
Specs
- Material: molded resin
- Dimensions: 28.5 in wide x 23 in deep x 14 in high
- Steps: 2
- Weight capacity: 300 lb
- Assembly: snap-together, no hardware
- Fit: straight or curved spa sides, interchangeable treads
- Item weight: not stated
XtremepowerUS 75161 2-Step Spa Step
The XtremepowerUS 75161 takes the same snap-together idea and stretches it a little wider and lower. Each of its two polyethylene treads rises 6.75 inches, so the climb feels like two ordinary stair steps rather than one tall hop, which knees tend to appreciate. The treads carry molded slip-resistant grooves, and the step can be positioned against straight or rounded spa walls. Because it is light for its size, it is easy to slide aside for cleaning behind the tub or to carry to an RV, a porch or a cold plunge setup, and the polyethylene body will not peel, chip or rust outdoors. If your tub wall is on the shorter side, or the step will serve double duty around the patio, this is the flexible pick of the group.
Specs
- Material: polyethylene
- Dimensions: 27.75 in wide x 24.5 in deep x 13.5 in high
- Rise per step: 6.75 in
- Tread size: 27.75 in x 11.75 in
- Weight capacity: 300 lb
- Item weight: 17 lb
- Assembly: snap-together, no tools
XtremepowerUS 36-Inch Universal Spa Step with Storage
At 36 inches across, this is the widest step in the guide, and the extra width buys the feature the other steps lack: the top tread hinges open to reveal a built-in storage compartment. Test strips, a floating thermometer, cover cleaner and a spare filter cartridge all disappear inside, which keeps the deck around the tub clear and keeps spa chemicals out of the house. The two-tone resin body is molded to look like wood slats, so it sits more comfortably next to a cedar or composite cabinet than a plain utility step. The slip-resistant tread pattern runs across both steps, and the broad footprint feels planted on concrete, pavers and decking. Choose it when your tub is wide, your household includes anyone who prefers a broader platform underfoot, or your patio simply has no good place to stash spa supplies.
Specs
- Material: resin
- Dimensions: 36 in wide x 22.5 in deep x 14.6 in high
- Steps: 2
- Storage: hinged top tread with built-in compartment
- Weight capacity: not stated
- Assembly: not stated
- Color: Brown and Black
Cover Valet Cover Caddy (NP509)
The Cover Caddy is the lifter for owners who are tired of heaving a waterlogged cover onto the ground. Its base plate slides under the spa and is held in place by the weight of the tub, so nothing screws into the cabinet. A gas spring does most of the work as you fold the cover back into the caddy arms, and the folded cover then stands tucked beside the tub instead of lying in dirt, leaves or snow. The design works with square, rectangular, round and octagonal spas and handles covers up to 120 inches, which covers nearly every residential tub including many swim spas. The trade-off is space: plan on about 36 inches of clear room behind the spa for the folded cover. For spas between 30 and 41 inches tall, it turns a two-person chore into a one-person routine.
Specs
- Mount: undermount base plate, optional side mount
- Lift assist: gas spring
- Material: powder-coated aluminum
- Fits: square, rectangular, round and octagonal spas, covers up to 120 in
- Spa height range: 30 in to 41 in
- Rear clearance needed: 36 in
- Item weight: 22 lb
- Warranty: 5 years
Blue Wave Low Mount Spa Cover Lift (NP5022)
The Blue Wave NP5022 is the simplest mechanism in this guide: a powder-coated steel pivot that mounts low, at the base of the cabinet, and lets you fold the cover over the bar and swing it down behind the tub. There are no gas shocks to wear out and very little to adjust, which is why this style has been sold for so many years. Because the folded cover hangs low behind the spa rather than standing tall, it preserves the view across the yard and works in gazebos and under pergolas where a standing cover would block sightlines or hit a roof beam. It fits square and rectangular spas up to 8 feet wide. The lift is fully manual, so a heavy, waterlogged cover still asks something of your arms and back, and round spas are not supported.
Specs
- Mount: low-mount pivot at cabinet base
- Material: powder-coated steel
- Fits: square and rectangular spas up to 8 ft wide
- Operation: manual pivot, no gas assist
- Rear clearance needed: not stated
- Warranty: 1 year
- Model number: NP5022
How to choose
Start with the step, and start with height. Measure your tub wall from the deck to the top edge, then look for a step whose top tread lands a comfortable stride below that edge. Most portable spas pair well with a two-step around 14 inches tall, like the three steps in this guide. Next, check width and footprint: a wider tread, up to the 36 inches of the storage step, feels steadier for turning around, while a narrower step suits tight decks. Match the step profile to your tub shape, since steps with interchangeable or reversible treads sit flush against curved walls and remove the toe-catching gap. Material is the easy part: resin and polyethylene both handle weather and spa chemicals, so choose based on size, storage and looks.
For the lifter, the deciding questions are mounting and clearance. Undermount designs like the Cover Caddy need no holes in the cabinet but ask for generous room behind the tub, about 36 inches, and may require an empty spa to slide the base plate under. Low-mount and cabinet-mount pivots need far less hardware clearance and keep the cover low, but they only fit square and rectangular tubs and leave the lifting to you. Gas assistance is worth it if your cover is thick, large or often waterlogged, and it is close to essential if one person will open the spa alone. Finally, confirm your spa shape and cover size against the lifter limits before ordering, because a lifter that fits the cover but not the corner radius will never feel right.
Who should skip
Skip the steps entirely if your spa is sunk into a deck or surrounded by built-in benching that already gives you a safe, level entry, since a freestanding step will only crowd the space. Skip the wide storage step if your deck is narrow, because its 36 inch width can block the walkway on small patios. Skip the Cover Caddy if you cannot spare about 36 inches behind the tub or if your spa sits on dirt or gravel, since its base plate needs a flat, solid surface. Skip the Blue Wave pivot lift if your spa is round or octagonal, or if a bad back makes any manual lifting a poor idea; a gas-assisted model is the safer match. And if your cover is already torn, foam-broken and waterlogged, replace the cover first, because no lifter makes a failed cover light.
FAQ
How tall should hot tub steps be?
The top tread should sit a comfortable step below the top edge of the tub wall, so you can swing a leg over without climbing. For most portable spas, a two-step unit around 13.5 to 14.6 inches tall, with roughly equal rises, matches well. Very tall spas may need a three-step model instead.
Can one person use a cover lifter alone?
Yes, that is the point of the design. Gas-assisted lifters like the Cover Caddy do most of the lifting once the cover is folded, so one person can open and close the spa. Manual pivot lifts are also one-person tools, but they ask more of your arms, especially with a large or waterlogged cover.
Do cover lifters damage the spa cabinet?
Undermount lifters do not touch the cabinet at all, because the base plate is trapped under the spa by its weight. Low-mount and side-mount lifters screw into the cabinet or a deck, which leaves small screw holes, so check that your cabinet framing is solid at the mounting points before installing one.
Will these steps work with an inflatable hot tub?
The steps will, since inflatable spas have lower walls and any of the two-step models here gives an easy climb. Most rigid cover lifters, however, are designed for hard-sided spas with a framed cabinet and a folding hard cover, so inflatable owners should confirm their cover type before choosing a lifter.
Final verdict
For a typical hard-sided backyard spa, the Confer Handi-Step HS2 plus the Cover Valet Cover Caddy is the pairing to beat: a flush-fitting, no-hardware step and a gas-assisted lifter that stores the cover off the ground. Choose the XtremepowerUS 75161 for a lighter, lower step that can travel, the XtremepowerUS storage step when deck clutter is the real problem, and the Blue Wave NP5022 when you want the simplest, lowest-profile lift and have a square or rectangular tub. Measure your wall height and rear clearance first, and either combination will make the spa easier to use every single day.
Product and ASIN Reference
| Product | ASIN |
|---|---|
| Confer Plastics Handi-Step HS2 | B0026O5TM2 |
| XtremepowerUS 75161 2-Step Spa Step | B07TCJMXNY |
| XtremepowerUS 36-Inch Universal Spa Step with Storage | B0B1W35R8F |
| Cover Valet Cover Caddy (NP509) | B0015Z417W |
| Blue Wave Low Mount Spa Cover Lift (NP5022) | B0027Z29TQ |
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Collect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registrySet up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!