Updated Nov 21, 2026· 8 min read

Key takeaways

  • Compare outdoor stair treads and non-slip step covers for deck and porch steps, from loose-lay rubber mats to grit strips, sized for safer footing.

Deck and porch steps take a beating from the weather. Rain leaves wood slick, morning dew turns concrete treacherous, and worn composite boards lose whatever texture they started with. A good set of outdoor stair treads adds a grippy, replaceable surface to each step without rebuilding the staircase, and the right format depends on your step material, how permanent you want the fix to be, and how much of each step you want covered. This guide compares five proven options: loose-lay rubber mats, studded mats with a nosing lip, wide cut-to-fit treads, tape-secured rubber mats, and adhesive grit strips.

Our top pick: Ottomanson Outdoor Rubber Stair Treads, Scroll Lattice, Pack of 5. Runner-up: Rubber-Cal Coin-Grip Non-Slip Rubber Tread Stair Mats, Pack of 6.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most deck and porch steps, a loose-lay rubber tread such as the Ottomanson Scroll Lattice set is the simplest fix: it grips textured concrete, brick, and stone by weight alone. Choose the Rubber-Cal Coin-Grip when you want a lip that hooks over the step edge, the FINEHOUS treads for wide steps, and grit strips for smooth surfaces that need a low-profile adhesive option.

Ottomanson Outdoor Rubber Stair Treads, Scroll Lattice, Pack of 5

Ottomanson’s scroll lattice treads are the classic loose-lay option. Each mat is a thick slab of molded rubber with an open wrought-iron-style pattern that gives shoe soles plenty of edges to bite into while letting water drain through instead of pooling on the surface. On rough-textured steps such as concrete, brick, stone, and textured RV steps, the weight and rubber underside hold the tread in place with no tools at all. The maker is candid that smooth surfaces are different: on wooden, painted, sealed, or glossy steps, plan on fastening with outdoor double-sided tape or adhesive so moisture cannot creep underneath and break the friction. The decorative pattern suits front porches where a plain black mat would look industrial, and cleanup is a hose rinse and air dry.

Specs

  • Material: Rubber
  • Size: 10 x 30 inches per tread
  • Pack count: 5
  • Thickness: 0.2 inches
  • Model: RDM8013-5PK
  • Pattern: Scroll lattice
  • Installation: Loose lay on textured surfaces; fastening recommended on smooth wood or sealed steps
  • Care: Hose down, air dry

Rubber-Cal Coin-Grip Non-Slip Rubber Tread Stair Mats, Pack of 6

Rubber-Cal builds its Coin-Grip mats from a blend of natural and reclaimed rubber, with a surface of raised circular studs that channel water away from the contact patch. The detail that sets this design apart is the molded lip: each mat has a one-inch nose that slots over the front edge of the step, so the mat resists being kicked forward every time a heel lands near the edge. At 3/16 of an inch thick, the mats add traction without noticeably changing step height, which matters on stairs used by older family members. They can sit loose on textured steps or be secured with double-sided tape for a semi-permanent hold, and the rubber shrugs off sun, ozone, and rain that would crack thinner vinyl treads.

Specs

  • Material: Natural and reclaimed rubber
  • Size: 9.75 x 29.75 inches per mat
  • Pack count: 6
  • Thickness: 3/16 inch
  • Model: 10-104-009-6pk
  • Surface: Raised coin studs
  • Nosing: 1-inch lip that hooks over the step edge
  • Weight: 2.5 pounds per mat

FINEHOUS Rubber Stair Treads, 35 x 10 Inches, Pack of 5

Most rubber treads stop at 30 inches long, which leaves the outer edges of a wide porch step uncovered. The FINEHOUS treads stretch to 35 inches, covering more of each step on broad deck stairs, and the rubber can be trimmed with a utility knife when a staircase runs narrower. The hexagon-textured surface keeps its grip in rain and snow, and because the mats are meant to be bedded in heavy-duty construction adhesive, they stay put on high-traffic steps where loose mats would wander. Glue-down installation is the trade-off: fitting takes longer, and removing a worn tread later is real work, so treat this as a semi-permanent upgrade rather than a seasonal mat. In return you get a flat, trip-free surface with no curled corners.

Specs

  • Material: Rubber
  • Size: 35 x 10 inches per tread
  • Pack count: 5
  • Model name: Non-Slip Rubber Stair Treads Mats – Hexagon Design
  • Surface: Hexagon texture
  • Installation: Heavy-duty construction adhesive (not included); can be cut to fit
  • Thickness: not stated
  • Weight: not stated

Spurtar Rubber Stair Treads, 35 x 9.85 Inches, Pack of 3

Spurtar’s treads pair a long 35-inch format with a raised diamond texture across the whole walking surface, so each footfall meets rows of small rubber points that push back against the sole. A formed nosing wraps the front edge of the step, covering the spot where slips usually start, and the thin 0.12-inch profile keeps the added height low. The maker rates the rubber for high temperatures and oxidation resistance, which suits sun-baked south-facing steps that cook lesser mats, and the treads work across wood, concrete, marble, tile, and metal stairs. Installation is a clean-and-stick job with adhesive tape, faster than glue but worth checking after the first heavy rain to confirm the bond is holding on your step material.

Specs

  • Material: Rubber
  • Dimensions: 35 x 9.85 x 0.12 inches per tread
  • Pack count: 3
  • Model: HFM000103
  • Weight: 6.3 pounds for the pack
  • Surface: Raised diamond texture
  • Nosing: Formed front edge
  • Installation: Adhesive tape after cleaning the step

Wild Tribe Non-Slip Stair Treads, 6 x 24 Inches, Pack of 3

Where a full mat is overkill, pre-cut grit strips give smooth steps a sandpaper-like bite. Wild Tribe’s treads use an 80-grit high-traction surface bonded to a strong adhesive backing, so fitting is peel, position, and press, with no fasteners and almost no added step height. That low profile makes them a good match for concrete, stone, tile, and marble steps where a thick rubber mat would look out of place or catch a toe, and for narrow staircases where a 10-inch-deep mat would overhang. The trade-off is longevity and coverage: grit wears smooth over seasons of foot traffic, and a 6-inch strip covers only the central wear path of each step, so expect to replace strips sooner than rubber mats and to place them carefully where feet actually land.

Specs

  • Size: 6 x 24 inches per tread
  • Pack count: 3
  • Surface: 80-grit high-traction abrasive
  • Installation: Self-adhesive, pre-cut
  • Recommended surfaces: Concrete, stone, tile, marble, and other smooth steps
  • Material: not stated
  • Added height: Minimal, low-profile strip
  • Format: Individual strips rather than full step mats

How to choose

Start with your step surface. Loose-lay rubber works by friction and weight, so it performs best on textured concrete, brick, and stone; on smooth or sealed wood, choose a tread you can tape, glue, or otherwise fasten, because water under a loose mat turns it into a sled. Next, measure step depth and width. Most residential steps suit a tread around 10 inches deep, and the tread should sit within the step without hanging over the nose unless it has a molded lip designed to wrap the edge. Longer 35-inch formats cover wide porch steps in one piece, while standard 30-inch treads leave margins on broad stairs.

Then decide how permanent the fix should be. Loose mats lift out for cleaning and seasonal storage, adhesive strips are quick but wear out, and glue-down treads are a multi-season commitment. Think about who uses the stairs: deep open patterns drain best in rainy climates, raised studs and diamonds give boots more to bite in mud, and a visible nosing helps everyone judge the step edge at dusk. Finally, count your steps before ordering, including the top landing if it gets slick, and buy the pack size that covers the flight with a spare for the highest-traffic step.

Who should skip

Skip loose-lay mats if your steps are smooth, painted, or sealed and you are not willing to fasten the treads down; an unsecured mat on wet sealed wood can slide at the worst moment. Skip glue-down treads on rented property or on stairs you plan to refinish soon, since removal is laborious. Skip grit strips as the only protection on heavily used outdoor flights in snowy climates, because packed snow buries a low-profile strip and the grit wears quickly under grit and salt tracked in from the street. And if a step is structurally damaged, rotted, or uneven, repair the stair first: no tread makes a failing step safe.

FAQ

Do outdoor stair treads work on wooden deck steps?

Yes, with the right format. Rubber treads grip weathered, textured wood well when laid loose, but smooth, painted, or sealed boards need the tread fastened with outdoor tape, adhesive, or screws so rain cannot get underneath and lift it. Check the bond after the first few storms.

How many treads do I need for a flight of stairs?

Count every step that gets foot traffic, and consider the landing at the top if it also gets slick. Packs in this guide cover three to six steps, so a typical porch flight of five or six steps may need one large pack or two smaller ones, plus a spare for the busiest step.

Can I cut rubber stair treads to fit narrower steps?

Most sheet-rubber treads can be trimmed with a heavy utility knife and a straightedge; the FINEHOUS mats are sold as cut-to-fit. Molded mats with a nosing lip should only be trimmed from the back edge so the lip keeps its shape, and grit strips can be cut to length before peeling the backing.

How do I clean and maintain outdoor step covers?

Loose mats lift off for a shake and a hose rinse; let them dry fully before relaying so moisture is not trapped against the step. Glued and taped treads can be swept and hosed in place. Inspect edges each season for curling or lifting, and replace grit strips once the surface feels smooth.

Final verdict

For a fast, good-looking fix on textured porch and deck steps, the Ottomanson Scroll Lattice treads are the easiest place to start. The Rubber-Cal Coin-Grip earns its place where heels strike near the step edge, thanks to its hooking lip, while the FINEHOUS and Spurtar mats cover wide steps that standard treads leave exposed. Wild Tribe’s grit strips round out the list for smooth stone and concrete where a low profile matters more than coverage. Match the format to your step surface and fasten anything that sits on smooth wood, and a slick flight becomes a surer one.

Product and ASIN Reference

Product ASIN
Ottomanson Outdoor Rubber Stair Treads, Scroll Lattice, Pack of 5 B0877QXGNN
Rubber-Cal Coin-Grip Non-Slip Rubber Tread Stair Mats, Pack of 6 B00Y3OKFSQ
FINEHOUS Rubber Stair Treads, 35 x 10 Inches, Pack of 5 B07ZVXJ7VM
Spurtar Rubber Stair Treads, 35 x 9.85 Inches, Pack of 3 B0C8SB4NKW
Wild Tribe Non-Slip Stair Treads, 6 x 24 Inches, Pack of 3 B07X2WXZDD
B
Beautiful Patio Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Outdoor Stair Treads and Non-Slip Step Covers…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Wedding Registry

Collect the home and kitchen items you want in one registry that guests can shop from.

Create a wedding registry
Subscribe & Save

Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.

Explore Subscribe & Save
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.