Best Deep Seat Outdoor Cushions for Patio Sofas

The best deep seat outdoor cushions for most patio sofas are the Greendale Home Fashions 2-Piece Sunbrella Deep Seat Set for fade and mildew resistance, the Arden Outdoor Foam Deep Seat Cushion Set for a USA-made foam value pick, and the Goodgoods 24×28 Deep Seat Cushions when your seat runs deeper than the standard 24 inches. Whichever you choose, the size, the fill and the fabric decide whether the cushions still look and feel right after two summers, so measure your seat first and match the construction to your climate.

Deep seating is the wide, low style of patio sofa and chair, usually with a seat depth of 22 to 28 inches, that you sink into rather than sit upright on. Cushions for it are thicker than dining-chair pads, typically 4 to 6.5 inches on the seat, paired with a separate back cushion. That extra thickness means more fill, more fabric exposed to sun and rain, and more ways for a poor fit to look sloppy. This guide covers how to measure, which fills and fabrics hold up, and how nine popular sets compare.

Our top picks

Top pickMuaMelop Outdoor Deep Seat Cushion Set

Check price on Amazon

Also greatIASEAHK Outdoor Chair Cushions

Check price on Amazon

Also greatMuaMelop Outdoor Deep Seat Cushion Set

Check price on Amazon

Also greatSummsun Outdoor Chair Cushions Set of 4

Check price on Amazon

As an Amazon Associate we earn from qualifying purchases at no extra cost to you.

How we chose

This is a research-based guide, not a firsthand review. We compared manufacturer specification pages and 2026 buying guides, then kept sets that clearly state their dimensions, thickness, fill and fabric. We ranked them on fit range (standard 24 in. and deeper seats), seat fill type and density, fabric class (true solution-dyed acrylic, solution-dyed polyester, coated polyester), stated UV and water resistance, and whether ties or non-slip backing are included. Claims such as fade-resistant or waterproof come from the makers. Where a listing did not state a spec, we say so instead of guessing, and we recommend you confirm the fabric content on the current product page before buying.

Step 1: measure before you shop

Deep seating frames vary, and the most common return reason is a cushion that is an inch or two off. Measure the frame, not your old cushions, because they compress and shrink over time.

1. Seat depth: front edge of the frame to the back support. Common results are 22, 24, 26 and 28 inches.
2. Seat width: inside edge to inside edge, between the arms.
3. Back height: the visible back panel from the seat deck to the top rail, usually 19 to 22 inches.
4. Back width: usually the same as the seat width.
5. Thickness: note how much room the frame leaves before the cushion rubs the arm.

Worked example: your sofa frame measures 24 in. wide and 26 in. deep between arms and back. A standard 24×24 set will leave a 2 in. gap at the front, so the seat will slide. The better choice is a 24×26 or the Goodgoods 24×28 (two inches too deep, but a snug fit if the front edge overhangs a little). A cushion that is slightly larger than the frame by about 0.5 to 1 in. compresses into place and looks full; one that is smaller than the frame by 1 in. or more looks like it is floating. Round up in width, and match depth to the actual seat.

Fill: foam versus polyester

Foam seat cores

Foam is the better seat core. It holds its shape and bounces back, and high-resilience foam resists permanent compression. Density is often written as 28D or 30D on listings (28 or 30 pounds per cubic foot of density, in marketing shorthand): the higher figure is firmer and usually lasts longer. Dacron or polyester wrap around a foam core softens the edge and gives a crowned, plush look without losing structure.

Polyester fiber back cushions

Polyester fiber (including recycled fiber) is the usual fill for the back cushion. It is soft, light and easy to fluff, but it flattens over time, so plan to reshape it. Some sets use foam in both pieces for a firmer, tailored look. For most households, a foam seat and a fiber back is the best balance of support and comfort.

Water behavior

Open-cell foam holds water. If rain or sprinkler water gets in, it can stay damp inside the cover and breed mildew. Covers with a waterproof liner, or a breathable cover on quick-drying foam, shed water better. Whichever you buy, bring cushions in or cover them during storms and long wet spells.

Fabric: solution-dyed acrylic versus polyester

Solution-dyed acrylic, the fabric class used in Sunbrella, has color added to the fiber before it is spun, so the color runs all the way through and resists fading in strong sun. It also dries quickly and resists mildew. It costs more than polyester, but it often lasts longer in sunny or humid climates. Polyester is cheaper and, when coated with a TPU layer or a water-repellent finish, resists rain well. However, it can fade faster, and cheaper coatings can crack with age. Some listings say solution-dyed polyester, which is better than untreated polyester but is not the same as true acrylic. Read the fabric line, not just the brand name.

UV, mildew and the details that matter

• UV and fade claims: look for stated hours or years, and treat them as the maker’s claim rather than a warranty. Goodgoods lists 1,000+ hours of fade resistance on its polyester sets, while Favoyard lists a three-year fade claim.
• Ties: ties on the seat and back keep cushions from sliding and shifting in wind. Greendale’s Sunbrella set includes string ties, and Arden and MuaMelop include ties as well.
• Non-slip backing: useful on smooth or wicker frames. Suionryorid notes a non-slip backing, while Favoyard’s 24×24 set includes non-slip straps.
• Removable covers: zippers make it easier to wash or replace the cover. Confirm this on the product page.
• Piping and seams: double-stitched seams hold up better under repeated sitting.

Comparison table

Best overall for fade and mildew resistance

Greendale Home Fashions 2-Piece Sunbrella Deep Seat Set

Spec line: 24 x 24 x 5 in. seat · 24 x 20 in. back · Dacron-wrapped foam seat · recycled polyfiber back · 100% solution-dyed acrylic · string ties

Best for: sunny or humid patios where color and mildew resistance matter more than the lowest cost. This is the only set in the group that names true Sunbrella acrylic.

Skip if: your seat is deeper than 24 in., since this is a standard-size set, or you want the lowest entry cost.

• Pros: premium fabric class, UV, water and stain resistance, ties included, foam plus wrap for a soft edge.
• Cons: costs more than polyester sets, only sold in standard sizes.

Best value with a firm foam seat

Arden Outdoor Foam Deep Seat Cushion Set

Spec line: 24 x 24 in. seat · 5 in. seat thickness · 6.5 in. back · high-density foam, USA-made · polyester with PFAS-free treatment · dual tie system

Best for: owners who want a firm, supportive seat and a cover with a water-resistant finish at a mid-range cost.

Skip if: you need extreme fade resistance for a sunny south-facing patio; a solution-dyed acrylic set is safer there.

• Pros: high-density foam, ties, thick back cushion, made in the USA.
• Cons: polyester cover will fade sooner than acrylic, standard size only.

Arden Outdoor Deep Seat Cushion Set (polyester fill)

Spec line: 24 x 24 x 5.75 in. seat · 24 x 21 x 6.5 in. back · polyester fill, recycled in the back · UV-treated polyester · ties included

Best for: a plush, lofty look on a budget, especially for seldom-used patios where a softer, cushier seat is the goal.

Skip if: you want firm support that does not flatten, because fiber-filled seats compress faster than foam.

• Pros: thick, soft, tied, listed as fade-resistant and water-repellent.
• Cons: fiber fill flattens, polyester cover is not solution-dyed acrylic.

Best for deeper or larger seats

Goodgoods 24×28 Deep Seat Cushions (2-pack)

Spec line: 24 x 28 x 5.1 in. seat · 24 x 20 in. back · 30D high-resilience foam · 100% solution-dyed polyester · 1,000+ hour fade-resistance claim

Best for: sofas with a 26 to 28 in. deep seat, where a 24 in. cushion leaves a visible gap.

Skip if: your seat is a standard 24 in., because the extra depth will bunch against the back.

• Pros: deeper size, firm 30D foam, solution-dyed fabric.
• Cons: ties are not clearly listed, so check the page if you need them.

Goodgoods 25×25 Deep Seat Cushions (2-pack)

Spec line: 25 x 25 x 5.5 in. seat · 25 x 20 in. back · 30D foam · solution-dyed polyester · 1,000+ hour fade-resistance claim

Best for: frames that measure 24 to 25 in., where a half-inch of extra size gives a fuller, tailored look.

Skip if: your frame is narrower than 24 in., because the cushion will crown awkwardly.

• Pros: thicker seat than most polyester sets, firm foam, sizing slightly generous.
• Cons: ties not clearly listed, only two pieces per pack, so you buy a second pack for a loveseat plus chair.

Best multi-piece sets for sectionals

MuaMelop 4-Set Deep Seat Cushions

Spec line: 24 x 24 x 5.75 in. seat · 25 x 22.5 in. back · 30D foam · 280 GSM polyester with TPU backing · adjustable ties

Best for: filling two seats at once with firm foam and tied cushions, particularly for sectional pieces that need to match.

Skip if: you need fabric that holds color in strong sun for many seasons; the maker lists fade and water resistance but not an acrylic fabric.

• Pros: four pieces, 30D foam, adjustable ties, TPU backing.
• Cons: polyester cover, back is sized differently from many frames, so measure the back.

Suionryorid 24x24x6 4-Set

Spec line: 24 x 24 x 6 in. seat · 24 x 22 in. back · high-resilience foam · polyester with waterproof treatment · non-slip backing

Best for: slick or wicker frames where cushions slide, and for a thick 6 in. seat at an entry-level cost.

Skip if: ties matter most to you; the listing does not clearly state them.

• Pros: 6 in. seat, non-slip backing, four-piece set.
• Cons: polyester cover, treatment may wear over time.

Best thick-foam and slim options

Pugire 6-Inch Outdoor Cushions

Spec line: 24 x 24 x 6 in. · 28D high-resilience foam · solution-dyed olefin · UV protection, water-repellent, fade-resistant

Best for: owners who want a thick, comfortable 6 in. seat and a fabric class (olefin) known for fade resistance at a mid-range cost.

Skip if: you need to match a specific back size; confirm the back dimensions on the page.

• Pros: 6 in. foam, solution-dyed fabric, UV and fade claims.
• Cons: ties not clearly listed on back cushions.

Favoyard 24×24 Outdoor Seat Cushion Set

Spec line: 24 x 24 x 4 in. seat · 24 x 20 in. back · 28D foam seat · polyester fiber back · polyester with TPU coating · non-slip straps · three-year fade claim

Best for: a thinner, tailored look on firm frames, where you want a TPU-backed cover and non-slip straps at an entry-level cost.

Skip if: you want a thick, lounge-style seat; at 4 in., this is the slimmest set here.

• Pros: non-slip straps, TPU coating, firm foam.
• Cons: thin seat, polyester cover.

Match the cushion to your patio

Care and storage

• Brush off dirt weekly and spot clean with mild soap and water. Avoid bleach on colored fabric.
• Let cushions dry completely before storing, because trapped moisture causes mildew.
• Store in a ventilated bin or deck box during winter and long wet spells.
• Rotate and flip seat cushions when the design allows it so wear spreads evenly.
• Do not store on bare concrete or next to a hot surface. Heat can warp TPU coatings.

Frequently asked questions

What size are deep seat cushions?

The most common size is 24 x 24 in. for the seat with a 20 to 22 in. tall back. Deeper sofas use 24 x 26 or 24 x 28 in.

Always measure your own frame, because brands vary by an inch or more in both seat depth and back height.

Is Sunbrella worth it for outdoor cushions?

Often yes in strong sun or humid climates. Solution-dyed acrylic keeps color and resists mildew better than most polyester.

In shaded or covered areas, a well-made polyester set may be enough, so weigh climate against cost.

What fill is best for deep seat cushions?

Foam, ideally 28D to 30D high-resilience foam, makes the best seat. Polyester fiber is a fine, soft choice for the back.

Fiber-filled seats flatten faster, so expect to fluff or replace them sooner than foam.

What does 28D or 30D foam mean?

It is a density figure used on listings, and a higher number means denser, firmer foam that usually holds shape longer. 30D is firmer than 28D.

The figure is the maker’s claim, so use it for comparison within a category and not as a lab measurement.

Are polyester cushions fade-proof?

No. Coated or solution-dyed polyester resists fading better than plain polyester, but direct sun will eventually dull any dye.

Solution-dyed acrylic is generally the most fade-resistant class, but even it benefits from shade and covers.

How do I keep cushions from sliding?

Use ties on the seat and back, or choose a set with a non-slip backing. Non-slip liners also work on smooth or wicker frames.

Make sure the cushion is not too small for the frame, since a gap makes sliding worse.

Should the cushion be bigger than the frame?

Slightly, yes. A seat cushion about 0.5 to 1 in. wider than the frame compresses to fill it and looks fuller than one that is undersized.

Avoid going more than an inch oversize, because it will bulge and wear at the edges.

How long do outdoor cushions last?

It depends on fabric, climate and care. Foam seats can last several seasons, while covers in full sun may fade sooner.

Storing them dry in winter and covering them in rain extends the life of every type.